Be it refurbishing an old abode or looking for a method to spruce it up, hardwood floor refinishing is an exceptional technique to make the place feel new. As time goes on, hardwood flooring becomes damaged and dull. This weathered hardwood floor is unpleasant and creates hindrances while cleaning. Sometimes, you can clean them easily with water and cloth, but it is tough to make them shinier.
But unlike different sorts of flooring, hardwood ones can recover themselves in obtaining their beauty. All you need to do is examine the damaged area, and if it has minor scratches, you can add a coat of varnish to it. But if the damage is severe, you have to do a complete refinishing job to make it like earlier.
So, are you planning to refinish it? If so, then you should be watching for tips to assist you with this. Remember that you can do the task yourself, but calling an expert by typing the best hardwood flooring refinishers near me on Google is advisable to execute the work with perfection. Still, if you are stubborn to do the work yourself, make sure you know the perfect technique and have the proper equipment to do so. You should measure the area and eliminate the damaged coating efficiently to avoid further complications. Besides, keep in mind the safety also. As a result of all these, it is best to hire a reputable company to execute the refinishing job. So without further delay, let us check out the below suggestions for refinishing the hardwood floor.
Measure the area
The first step you require to do is measure the surface area of the hardwood floor, which you want to refinish. It is a complementary process before sanding. The experts say that an individual can sand around a 50 square feet floor area manually with the help of sanding paper. But anything over this area, your muscles and joints will demand rest. In that case, you will require a power sander to help your joints. That is why appointing a refinisher is the most suitable solution to protect your health.
Remove the old coating.
Though measuring and sanding the hardwood floor seems to be the most significant step, removing the old finish is more critical than that. You can consider it as the first real action while refinishing the floor. It is a strenuous job, as you need to move the objects and furniture aside to execute the task. After that, you are required to eliminate the old coating of wax, paint or varnish effectively. You have to sand or use several techniques and remover to strike out the previous finish. If the floor is wax-coated, a wax stripper will help you to remove it. But for paint coats, purchase chemicals, and for a varnish-based floor, acetone or lacquer thinner. They can help you to remove the coating efficiently. But this is not all, as after removing it, you have to sand the entire area.
Remove the nails with caution.
Before refinishing, organize safety equipment to avoid injury as the job involves much wear and tear. Hazards like screws, tacks, nails or splintered wood can harm you while removing them. They will also ruin the sandpaper if you are not removing them from the floor. So, exclude them properly to protect the refinished hardwood floor. Besides, always fill the hole with wood filler. You can buy the filler by matching it with the color of the floor.
Wipe the floor and apply the coating
The final step is to wipe the floor with a wet or resin-based cloth to remove the microscopic dust particles. After that, you can apply the new coating of your preferred material. Use wax, paint, or varnish for this. But a single coat will not make the job productive. You have to implement at least three coats of any material. After each coating has dried, sand the floor with sandpaper and wipe the fully refinished hardwood floor again to help it shine better.